SamsungS5

Rooten und Custom Rom für das Samsung S5 LTE+ / G901F / kccat6

Basis-Anleitung: https://forum.xda-developers.com/t/samsung-galaxy-s5-g901f-4g-rooting-installing-custom-recovery-adding-custom-rom.3262065/

Inhalt

Rom-Download

Die offiziellen LineageOS Builds für kccat6 sind nicht mehr verfügbar.

Es gibt jedoch einen Build von Resurrection Remix (Lineage 16 / Android 9): https://cygwin.de/rr/kccat6/

Sicherheitskopie Rooting-Anleitung

Quelle: https://forum.xda-developers.com/t/samsung-galaxy-s5-g901f-4g-rooting-installing-custom-recovery-adding-custom-rom.3262065/

WELCOME TO SUPER GUIDE on how to root and add Custom Recovery for Samsung Galaxy S5 (SM-G901F 4G+ kccat6/kccat6xx) (ONLY FOR THIS MODEL)!

~Guide By me, KiprasLT

Credits:
To @Tkkg1994 for TWRP Custom Recovery,
To The well known and Mighty @Chainfire (If I missed someone, PM me!)


IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!

BEFORE STARTING, make sure you have your sistem backup, if somethink goes wrong.

PLEASE, follow the instructions step-by-stop to make sure you succeed!


Now, let's get started:

1. Make sure you have USB Debugging enabled on your phone. You can easily enable it by going into --> Settings, scroll down, till you see "About phone" --> Scroll down till you see "create number". Tap it 7 times and you will enable developer settings. Now go back, scroll down again, and next to "About phone" you will see "Developer Options". Click on them. Make sure they are enabled by looking at top right corner and clicking white dot. Now go down till you see "USB Debugging" Press on it and click "OK" Check if it's enabled, then your phone is prepared.

2. Go ahead and download Odin3 latest (most recent) version into your computer. (Just google "Download Odin" or "Download Odin3".

3. Create a folder on your desktop and name it whatever you wish.

4. Download CF-Autoroot-kccat6-kccat6xx-smg901f.tar.md5 by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is autoroot. It will root your device.

5. Download TWRP Custom Recovery by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is Custom Recovery, it's the best one yet for SM-G901F. (Thank you once again Tkkg1994 for letting us use it and have it on our S5's)

6. Make sure your phone has at least 60% of battery remaining.

7. Power off the phone while holding power button and pressing "Power off" and "OK" and wait for it to turn off.

8. Get the phone into Download mode by pressing and holding Volume Down + Power + Home buttons at once. Wait for yellow think pop up with some text. Then press Volume UP to get into Download mode.

9. Plug your phone into PC with USB cabble. Then Open Odin. If it's not installed, just install it. Then wait for odin to recognise your phone (where it says ID:COM) that little box should turn into blue color. Go to options, make sure that ONLY autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select CF-Auto-Root-kccat6-kccat6xx-smg901f.tar.md5 and click "open". Wait for it to load up.

9.1 Hit the start button and watch the magic happen. You can take a look at your phone and see that blue think is charging up fast. Just let him do his thing. After the autoroot is applied, the phone will reboot itself. Remember that only first reboot after flashing somethink new will take longer. Stay calm and chill. Btw you can close odin for now.

10. Enter the pin code if the phone asks it, then turn on wifi. SuperSU message should pop up telling to install SuperSU. Do it (You need Wi-Fi). When the SuperSU is installed, your device should be rooted. (Don't freak out if SuperSU message didn't pop up, you can allways install it from Google Play store). You can go to google play store, download root checker, open it, click on "check root" or something similar, it will ask root acess, accept it. Then it's probably going to show that this device is properly rooted. Gratz! If not, you managed to screw up somewhere :crying:

Now, it's time for Custom recovery. It's much more better than standart recovery, and it will probably be needed in future.

Sooo, step 11. Get your phone into download mode once again (Power off, then Volume down+Power+Home) and then Volume up.

11.1 Connect your phone into your computer with USB cabble.

11.2 Open Odin/Odin3. Again, wait for it to recognise your phone, then click on "options", again, make sure that only Autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select g901f-cwm-recovery-6.0.5.1(1130).tar and press "open". Wait for it to load up.

11.3 Hit the start button and once again, watch the magic happen.

12. After succesfully flashing custom recovery, your phone should reboot by itself.

Guess what folks? This is it! You should have your SM-G901F G4+ rooted and have a custom recovery applied! CONGRATULATIONS to you! If you liked the guide, please hit "Thanks" button, it helps a lot And you can also rate this Threat! If you need any help, just post your question down here in the comment section.

Just a thing: I don't suggest installing Cyanogens (CM) Custom ROM. I've had so much trouble with CM 12, with removing it, fixing my phone and fixing google apps untill I totaly reseted it. However you are free to do what you want. If you found better ROM that's working for you and may work for others, be sure to share it right here in the comment section!

Edit: I found out that this guy @Tkkg1994 posted a good guide about how to install a ROM for this device! I tested it myself and it works perfectly! Currently testing other features, but It's the best one yet for SM-G901F G4+ kccat6/kccat6xx, you can check out the guide by clicking here!

TWRP-Anleitung

Kurzversion:

1.Telefon in Download mode bringen: Ausschalten, dann wieder einschalten mit POWER + HOME + VOLUME DOWN

2.Odin (z. B. version 3.13) und TWRP (vorzugsweise 3.2.3, für deodexed 3.1.1-0) per AP in's Telefon flashen.

3. TWRP beim Einschalten starten durch POWER + HOME + VOLUME UP

INSTALLING TWRP​

Quelle: https://forum.xda-developers.com/t/installing-twrp-and-linageos.4334465/

# Make sure you are on android 11 and that you have followed the guide mentioned for unlocking the bootloader and rooting
1. Go in settings app
2. Go in to developer options (they should already be enbled if you folowed the guide mentioned)
3. Enable usb debuging if they aren't allready
4. Reboot to download mode, you can do it with the HW keys or send it from the Android Debuging Bridge (ADB)
For the HW key method power off the phone and conect it to the PC, then hold VOL UP and VOL DOWN at the same time. After that you should get two options, you want the first one which is just press VOL UP.
For the ADB method, install the most up to date SDK platform-tools version and open CMD or TERMINAl in the install folder and type adb reboot download.
A usb debuging request should pop up on the phone, you want to click allow, and it should reboot in to download mode.
5. Open odin, click on AP or PDA and select the twrp file you have downloaded and uncheck auto reboot in options then you can click start
6. After the flashing process hold VOL DOWN and POWER at the same time and immediately after the phone exits the download mode hold VOL UP and POWER at the same time
7. If you failed to boot in to TWRP the instalation process will have to be repeated again.

INSTALING LINAGEOS OR ANY OTHER CUSTOM ROM​

Download a AB rom, TREBLE CHECK is wrong.

# You will need an a external Sd_card if you are doing the method 1

Method 1.​

1. Transfer the linageos .img file you have downloaded to your sd_card.
2. Boot in to TWRP, VOL UP + POWER while booting or adb reboot recovery.
3. Once in TWRP select wipe, click advanced wipe and select data, system, internal storage, cache, dalvik, optional(efs, and thoes other stuff, not going to name them.)
4. After successful wipeing go in to install and select storage, click Micro Sd card and click ok.
5. Click install image and find your LinageOs.img file and select it.
6. Now you should be in a install image screen, select System Image and swipe to FLASH.
7. Reboot and enoy.

Method 2.​

1. Boot in to TWRP and go in to WIPE, selcect advanced wipe and check data, system, internal storage, cache, dalvik, optional(efs, and thoes other stuff, not going to name them.)
2. Go in to advanced options and select ADB sideload.
3. From the TERMINAL or CMD window type "adb devices" to check if your device is beeing recognized.
4. If the conections is confirmed type "adb sideload LineageOS.zip"
5. After flashing reboot and enoy.

If by any chance you get issues with flashing roms in TWRP because of problems with dynamic partitions flash DynaPatch to allow flashing to dynamic_partitions in recovery, you don't necesery need to use DynaPatch. You can use unviresal system rv disable enable, etc and etc. This is a problem in TWRP it self which soon should be fixed.
Another thing is if you rooted your phone the way in my guide, the patched boot_image might still stick to the new rom.
Knowng bugs:
LinageOs screen touch stop after putting the phone to sleep.

Siehe auch

• Andere Topics und online-Links